Strymon Mobius User Manual page 17

Mobius
- User Manual
Mod Machines: Phaser Continued
SPREAD:
TIPS & TRICKS:
STG', Depth knob to about 2 o'clock, and the REGEN param at half or
a bit less to taste. Switch to '6 STG' for chewy funky phasing.
For infinite rising barber pole phaser, set MODE to BARBER,
WAVSHP to RAMP, and set the Depth control to maximum. Change
the WAVSHP to SAW to get infinitely falling barber pole phaser.
Adjust REGEN to dial in the intensity.
Try slow speed SINE or TRI waveforms on the 8, 12, and 16 stage
phasers. For maximum swirl, experiment with the SPREAD param in
a stereo setup.
Determines the offset between the Left and Right
channel LFO signals. Listen to the effect it has on the
stereo image as you adjust the parameter. Note:
applies when using the unit in Stereo Configuration.
Off
1/4
Half
3/4
Full
For classic orange phaser sounds, set MODE to '4
®
Only
pg 17