Parts In The Box; Installation - Screen Innovations Solo Installation Instructions Manual

PARTS IN THE BOX

1
(2)Zero Gap Wall Brackets
Parts in the Box
2
(4) No. 8 Flat-head
Screws
2

INSTALLATION

Proper mounting preparation will ensure a great
installation. Mounting brackets must be screwed into
structural members of such as ceiling joists. You may
use wood screws provided, or other anchors (not
provided) capable of carrying the load, that is suitable
to the substrate.
DO NOT MOUNT TO HOLLOW SHEET ROCK.
1. The drop is adjustable in the field between 0'' and
the MAX DROP (12'', 24'', or 36'', 4'' for short throw)
ordered for your screen. Use the drawing (refer to
pg 5) to specify a bracket vertical position where the
bottom of the bracket to the top cassette is 3''. Make
sure this vertical position will allow you to extend
your screen to achieve the desired vertical position
of your viewing area.
Installation
(contd. on next page)
3