Operation; Installation; Smart Diet Scale Operation - Smart Diet Scale User Manual

2.0

Operation

2.1

Installation

1. Unpack the Smart Diet Scale box and its contents:
• Smart Diet Scale
• Smart Diet Scale Plates (qty 4)
• USB Cable
• Quick Start Guide
For best results, power the Smart Diet Scale using four AA batteries or by connecting the scale to a PC through the
USB cable.
2. Remove the small cover from the bottom of the scale, insert the batteries and replace the cover.
3. Download and install the
The Smart Diet Scale application works with iOS
support Bluetooth Low Energy.
2.2

Smart Diet Scale Operation

1. Place the scale on a dry, level, solid surface. The area should be between 41°F-95°F
(5°C-35°C), and 30%-85% relative humidity. The scale can also be connected to a
power source via a USB cable.
Ensure there is an Internet connection and that Bluetooth is enabled on the smart device with
the SDS application.
2. Press to turn on the scale. The display will show all segments (888.8) for four seconds.
See Figure 2-1.
application to a supported Android or iOS device.
Smart Diet Scale
®
8th generation and above and Android devices 4.4 and above that
Figure 2-1. Startup Display
Operation 3