Add A Food Item With Bar Code Scanner; Review/Edit A Meal; Divide A Meal With Others; Add A Photo Of A Meal (Optional) - Smart Diet Scale User Manual

8. Items can also be added by selecting one of the five commonly used ingredients (#8) displayed under
. See Section 2.3.4 to learn how to edit these ingredients.
Food
9. Repeat steps 1-7, removing items from the scale as needed. Nutrition facts (#15) are displayed on the right
of the application screen.
10. Touch the weight (#4) to the left of an item to display calories. Touch again to cycle through fat, protein,
carbohydrates, fiber, cholesterol and sodium.
11. Exit the application to save the meal to the timeline (#2).
The smart device requires an Internet connection in order to access the food items in the Smart Diet Scale
application. For best results, wait 2-3 seconds for the scale to stop blinking after: powering on the scale,
zeroing the scale with Tare (with/without containers/plate) and when adding/removing weight from the scale.
2.3.3

Add a Food Item with Bar Code Scanner

Below , find the
Select Food
bar code of any food item. The food item will display. Press
2.3.4

Review/Edit a Meal

Touch the on the timeline (#2) to view a past meal. To delete a dish from a meal, slide the dish to the
Calories Circle
left.* Press to delete the dish from the meal.
Delete
*On an Android device, press and hold the dish to delete the dish from a meal.
Press and hold one of the commonly used ingredients (#8) in order to edit that ingredient. A list of ingredients used
in existing dishes will appear. Any ingredient can be selected to replace an existing commonly used ingredient (for
example, oil). Alternatively, search for the ingredient using the
ingredient name.
2.3.5

Divide a Meal with Others

Touch the person icon on My Dish to select and divide a meal. A list of registered users will appear. Select those
whom you will be sharing your meal with. The calories of the meal will divide evenly amongst those you select and
the calories will be recorded on the timelines of everyone selected.
2.3.6

Add a Photo of a Meal (Optional)

If desired, a photo of the meal can be added. When the meal is ready, click on the camera (#6) in the upper right
hand corner of the Smart Diet Scale Application. This will turn on the camera of the smart device. Take a photo of
your meal. If the photo looks good, press
** in the bottom left corner. The captured photo will display in the upper right corner of the application
Retake
screen.
* On an Android device, press
**On an Android device, press
2.3.7

Log

Press the icon (#9) to access a log of the calories consumed for each profile. Switch between profiles by
Log
pressing on the person icon on the left side of the
*Press the back button on an Android device when finished.
2.4

Multiple Scales

The Smart Diet Scale Application can only sync with one Smart Diet Scale at a time, even if there are two Smart
Diet Scales within close proximity to the application. Two Smart Diet Scales can be used in one home only if there
is a smart device, equipped with the Smart Diet Scale Application, uniquely available for each scale. Saved data is
specific to the smart device used and would not be available on a smart device that was not used to record the data.
Saved data is not shareable between devices.
8 Smart Diet Scale
(#7). Press the
Bar Code Icon
Use Photo*
.
OK
Cancel.
Log
and the Bar Code Reader will open. Scan the
Bar Code Icon
.
Done
Enter Ingredient Name
in the bottom right corner. If the photo is unsatisfactory, press
menu. Press * when finished.
Done
Select
search bar or filter by