Charging The Battery - Tapwave Zodiac User Manual

Charging the battery

To use your Zodiac handheld, you must connect it to an AC outlet and charge
the battery.
1. Connect your handheld to an AC outlet using one of these three setups:
•
Desktop Setup. Connect the optional HotSync cradle (sold separately)
to the HotSync cable, your computer, and an outlet as described in the
cradle instructions, and then insert your handheld in the cradle.
•
Travel Setup. Connect the HotSync cable to your computer and an
outlet as described on
the HotSync cable.
•
Ultra-light Setup. Connect the power adapter cable to your handheld.
2. Wait approximately 2 hours for the battery to fully charge.
While your handheld charges, the LED repeatedly increases in brightness.
When your handheld is fully charged, the LED turns green.
When your handheld needs to be recharged, the LED blinks and turns yellow.
When the LED turns red, your battery is extremely low.
Int rod uction to your Zodiac Handh eld
page
Travel Setup
12, and then connect your handheld to
Ultra-light Setup
Using Your Zodiac Handheld 13
Charging the battery