Using The Calculator Buttons - Tapwave Zodiac User Manual

Using the Calculator buttons

Calculator includes several buttons to help you perform calculations.
•
mistake while entering a number in the middle of a calculation. This
button enables you to re-enter the number without starting the
calculation over.
•
calculation.
•
value. If you want to enter a negative number, enter the number first
and then press the +/- button.
•
enter with the M+ button is added to the total stored in memory. The
number that you add can be either a calculated value or entered by
pressing the number buttons. Pressing this button has no effect on the
current calculation (or series of calculations); it merely places the value
into memory until it is recalled.
•
calculation.
•
Clears the last number you entered. Use this button if you make a
Clears the entire calculation and enables you to begin a fresh
Toggles the current number between a negative and positive
Places the current number in memory. Each new number you
Recalls the stored value from memory and inserts it in the current
Clears any value stored in Calculator's memory.
Using Calculator
Using the Calculator buttons
Using Your Zodiac Handheld 114