ActionTec 802.11b Wireless Access Point User Manual page 7

3. You will be asked to acknowledge if the selected location is OK, click Next to
continue. If not,select Browse and choose a new directory for the location of the
KickStart files. Once completed click Next to continue.
4. You will be prompted to choose a folder where your application Icons will
reside. Once you've made this choice, click on Next to continue.
5. You will be asked to confirm that all of the choices you made are correct, once
you are satisfied, click on Next to continue.
Configuring the Actiontec 802.11b Access Point
12
6. Once the files are copied, you will be presented with the 'Setup Complete'
window, you can choose to finish without launching Kickstart by Simply
clicking on Finish or you can choose to launch KickStart at this time by
checking the 'Yes, Launch the program file' and the clicking Finish.
Launching KickStart
1. If you chose not to Launch KickStart once the installation was completed, you
can launch Kickstart from the Start Menu by clicking on Programs, then
Actiontec 80211b AP followed by KickStart.
2. Once the application starts, click Next to continue.
Configuring the Actiontec 802.11b Access Point
13