Audiovox VME 9425 Owner's Manual page 117

10 A prompt to pair or bond should appear on your mobile phone Accept the request
and initiate the process
NOTE: Some mobile phones require a "pass key" or pairing code to connect.
If your phone requires a pass key or pairing code, you will need to enter this
number. The default pairing code for many wireless phones is "0000". The
default code for the unit is "1234".
11 A prompt to enter a PIN number or passkey for the unit should appear The default
passkey for the unit is "1234"
12 At this point a prompt stating that pairing is successful should appear Another
prompt should appear asking connect to the unit, Yes or No Press Yes The
mobile phone and the unit should connect The mobile phone should display a
message similar to "De ice Connected " The mobile phone and the unit are no
connected VME 942
Managing Incoming Calls
When connected to a Bluetooth® phone, the unit ill mute audio output, pause
CD play, and change to the Bluetooth screen belo
incoming phone number or as-signed name for that number ill appear in the top of
the screen An audible tone ill sound from the unit and a graphic display ill appear
on the front panel If the incoming call has no caller ID, the unit ill display "Pri ate
Caller"
Direct Entry icon: Touch to access the direct dial screen Refer to the Direct Entry
screen for further detail
icon: Touch to ans er an incoming call
ill appear on the mobile phone list of de ices
117
hen a call is recei ed The