Advertisement
T5HO Hybrid Fixtures (White with Decor Endcaps)
Models: 420558, 420559, 420560, 420561
Installation, Operation & Maintenance Guide
FIXTURE ASSEMBLY
Step 1 – Lay the two fixtures on a surface that won't scratch the
finish. Power cords should be positioned on opposite sides and
the power cords should be closest to the outside of the fixture
as pictured.
Step 2 – Slide the suspension hardware into the
channels on each fixture.
A
B
Step 3 – Attach the metal endplate to each side of the fixture
using the longest screws. The metal endplates have a cutout to go
around the power cord on each side of the fixture. The endplates
also have additional holes that are larger and designed to go over
the screws pre-installed on the ends of the fixture housings.
2
Step 4 – Install the bracket needed to mount your LED fixture
between the two T5HO fixture housings. The brackets will rest in
the channels on the fixture housings and are then secured in place
with the shortest screws.
Step 5 – Remove the reflector protective film and install
the T5HO Lamps of your choice into the silicone endcaps.
Secure the lamps with the clip at the end of each lamp.
A
B
C
www.aquaticlife.com
Advertisement
