Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Jackco 65300
Summary of Contents for Jackco 65300
- Page 1 3 TON LOW PROFILE ALUMINUM FLOOR JACK USER'S MANUAL *This hydraulic jack conforms to all "ANSI / ASME" safety standards. Jackco Transnational Inc. © 2010 South El Monte, CA 888-452-2526 To see more jackco products please visit our website at www.jackco.com...
-
Page 2: For Your Safety
FOR YOUR SAFETY • Read these safety instructions carefully and keep this manual in an easy to find place as you may need to use it again. • Non-compliance with these rules may result in injury or damage to the jack or the vehicle. •... -
Page 3: Specification
SPECIFICATION Capacity: 3 tons Chassis Width: 13 in Min Height : 3.75 in Saddle Diameter : 4.52 in Max Height : 18.1 in Net Weight : 58 lbs Length: 26.4 in PRIOR TO OPERATION Air may become trapped in the hydraulic system during transit. To Purge Air 1.Insert the handle into the socket and secure it with the set screw provided. -
Page 4: Maintenance
MAINTENANCE Important: Both the maintenance and repair of the jack may only be performed by qualified persons, who have sufficient knowledge of the hydraulic system used in these jacks Regularly lubricate the moving parts in the wheels, arms, handle and pump roller pin. •... -
Page 5: Troubleshooting
TROUBLESHOOTING Caution: To prevent personal injury, all inspection, maintenance, and repair procedures must be performed when the jack is free of load. Trouble Cause Solution 1.Release valve is open 1. Verify the release valve is closed. Release valve may need cleaning. 2.Low/no hydraulic fluid in 2. - Page 8 No other warranties, expressed or implied, including those of merchantability or fitness for particular purpose shall be applicable to Jackco except as specifically stated herein. In no event shall Jackco be liable to any party for any special, direct, indirect, consequential, punitive damage of any nature caused by the sale or use of the equipment or tool.