ActionTec Wireless Digital Media Player DMP011000-01 User Manual page 7

Action Action Actiontec Wireless Digital Media Player User Manual
S/P Dif, Optical Ports
The S/P Dif (Sony/Philips Digital Interface) port is used to connect the Player to
a compatible S/P Dif audio receiver. The S/P Dif uses an RCA cable to connect,
while the Optical port uses an optical cable.
Ethernet Port
The Ethernet port is used to connect the Player to a computer or hub/router
using a crossover Ethernet cable. A crossover Ethernet cable must be used to
connect the Player to a computer. A standard, straight-through Ethernet cable
will not connect the Player to a computer.
Power Port
The Power port is used to connect the Player to a standard electrical outlet using
the included Power cord.
Side Panel
On the left side panel of the Player (when viewing from the front) includes a PC
Card slot, which is used to connect the wireless PC Card included with the Digital
Media Player kit. To install the card, see chapter 2, "Setting up the Player."
tec Wireless Digital Media Player User Manual tec Wireless Digital Media Player User Manual
4 4 4