Setting Up The Player; Connecting The Player To A Television/Stereo - ActionTec Wireless Digital Media Player DMP011000-01 User Manual

Setting Up the Player

The instructions that follow parallel the steps contained in the Actiontec Installation
® ®
Buddy , which provides a visual guide to setting up the Player. It is recommended the Buddy Buddy
user run the Installation Buddy first, before attempting any other procedures.
To use the Player, it must be connected to a television and/or stereo, the wireless
connection must be set up, the Actiontec Media Buddy must be installed, and the
computer must be set up to find the media files.

Connecting the Player to a Television/Stereo

The first step in using the Digital Media Player is connecting it to a television and/
or stereo.
1. Remove the Wireless Digital Media Player from its box and place near or on
top of the television.
2. Remove the Power Cord from its white box.
Power Cord Power Cord from its white box.
7
2