How To Set The Dip Switch #1 - Dadam micro GreenOK-II User Manual

3.2 How to set the DIP Switch #1

DEVICE TYPE
The DEVICE TYPE can be configured as one of GMS-120ZB, GMS-130ZB and
GMS-140ZB as per the sensor connected.
The default TYPE is GMS-120ZB.
If the wrong DEVICE TYPE is configured, you may not read the correct data.
TX INTERVAL
The TX INTEVAL can be configured as 15sec or 1sec.
The default INTERVAL is 15 seconds.
< IMPORTANT >
WHENEVER YOU CHANGE ANY DIP SWITCH
POSITION, YOU MUST REBOOT THE UNIT IN
ORDER TO MAKE THE CHANGE BE EFFECTIVE.
<Figure 5> DIP Switch #1 Configuration of Wireless Sensing Unit
GreenOK-II : Wireless Thermo-Hygro Monitor
- -
User's Manual (Rev 2.1)