XPower X-34AR Owner's Manual page 9

1. Always disconnect the axial air mover from its power source before performing any
maintenance or cleaning.
2. Never clean the unit with water directly.
3. When not in use, unplug and store the axial air mover in a dry indoor place out of reach of
children.
4. To keep the axial air mover clean, use a damp cloth to wipe the surface of the housing.
SYMPTOM
Motor Not Running
Scraping Noise From Fan
Weak Air Flow
Maintenance Instructions
Troubleshooting
PROBABLE CAUSE
Switched Off
Power failure
Wiring failure
Obstructions at the
intake or exhaust of fan
Fan broken
Obstructed vents/inlets
- E8 -
ACTION
Make sure unit is plugged in
and switch is turned to ON
mode
Check outlet/Change to
another outlet
Contact XPOWER for repair
Remove obstruction(s)
Contact XPOWER for repair
Clean out vents/inlets