XPower X-34AR Owner's Manual page 5

1) With the unit unplugged, carefully place the XPOWER unit on a stable, flat, and dry surface.
2) Plug the cord into a grounded G.F.C.I. outlet only, the use of a 3-prong to 2-prong adapter
is strictly prohibited.
3) Turn on the switch to make sure the axial air mover is operating correctly.
4) To reduce the risk of injury, close supervision is necessary when an appliance is used near
children. Do not allow children to play with or around an Axial Air Mover at any time.
Daisy Chain (X-34AR / X-34ASR2 / X-47ATR)
If utilizing the Daisy-Chain feature, only use devices under 2 AMPS for 12-AMP circuit.
X-34AR & X-34ASR2 axial air movers have an on-board circuit breaker. If the auxiliary outlet
overloads, the circuit breaker will trip. If the breaker does trip ,unplug the units and press the
circuit breaker Reset button. Plug the units back into the power source and turn on the switch.
Timer (X-34TR / X-47ATR)
Models using a timer can be set up to 3 hours long. After the timer expires, the axial air mover will
turn off while the speed control will be at the last set position. Set position to off and then again at
a desired speed to continue operation.
Stainless Steel Rack (For X-34ASR2)
This unit includes a durable and sturdy rack which allows 360° full
angle rotation. The rack's stainless steel composition is anti-corrosive
and rust resistant—ideal for humid conditions.
Operation
- E4 -