1. Manuals
  2. Brands
  3. Procentec Manuals
  4. Measuring Instruments
  5. ComBricks HE+
  6. User manual

Procentec ComBricks HE+ User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ComBricks HE+
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ComBricks HE+ and is the answer not in the manual?

Questions and answers

Related Manuals for Procentec ComBricks HE+

Summary of Contents for Procentec ComBricks HE+

  • Page 1 ComBricks HE+ User Manual...
  • Page 2 ComBricks is a registered trademark of PROCENTEC. Other products or company names are or may be registered trademarks and are the property of their respective companies.

  • Page 3: Important Information

    2292 JD WATERINGEN The Netherlands T: +31-(0)174-671800 F: +31-(0)174-671801 E: info@procentec.com Document Updates You can obtain constantly updated information on PROCENTEC products on the Internet at www.procentec.com You can also contact PROCENTEC Customer Support: • by phone at +31-(0)174-671800 •...

  • Page 4: Table Of Contents

    3.6.2 Testing and commissioning ......................27 Repeater modules ...........................28 Configuring repeater modules ......................28 3.8.1 Customizing the PROFIBUS network (NW0/NW1) ................28 3.8.2 Redundancy (RED) ...........................29 3.8.3 Hardware or software settings (H/S) ....................29 ComBricks HE+ User Manual | June 2017 | © PROCENTEC 4/104...
  • Page 5 Streaming with ProfiTrace 2 ......................59 Summary of Statistics and Events ....................61 Head Station ....................64 Overview ............................64 Relay contact ...........................65 SD card .............................65 6.3.1 Inserting/replacing the SD card .......................65 ComBricks HE+ User Manual | June 2017 | © PROCENTEC 5/104...
  • Page 6 Free WiFi channel detector ......................91 Some SNMP tools ..........................91 13. Sales offices and distributors ............... 92 14. Order codes ....................97 15. Glossary ....................... 98 16. Certificates ....................101 ComBricks HE+ User Manual | June 2017 | © PROCENTEC 6/104...
  • Page 7 17. About PROCENTEC ..................102 18. Notes ......................103 ComBricks HE+ User Manual | June 2017 | © PROCENTEC 7/104...

  • Page 8: Product Description

    Transparent data hub (repeaters, fiber optic, RS 485-IS, DP slave, PROFINET, etc.) Fig. 1 - ComBricks modules in many applications. Please note: Not all modules are available yet for ComBricks HE+ ComBricks HE+ User Manual | June 2017 | © PROCENTEC 8/104...

  • Page 9: Product Features

    • Improved EMC protection • Powerful web server • ProfiTrace OE for monitoring 4 networks • Multi-language • Free CommDTM / DP-V1 master • DIN-rail mounting • IP 20 ComBricks HE+ User Manual | June 2017 | © PROCENTEC 9/104...

  • Page 10: Modular Profibus Repeaters

    Double Scope repeaters Maximum 2 Double Scope modules Fig. 2 - Repeater configuration examples ComBricks HE+ User Manual | June 2017 | © PROCENTEC 10/104...

  • Page 11: Cable Redundancy

    • Star, tree and bus structured networks • Motor control centers (drawers) • Redundancy for high availability • EMC vulnerable applications • Spur lines • Isolator for sensitive devices ComBricks HE+ User Manual | June 2017 | © PROCENTEC 11/104...

  • Page 12: Profitrace Oe - Remote Monitoring In A Web Browser

    Deploying ComBricks repeaters for regular automation means automatic availability of ProfiTrace OE. Monitoring 4 networks Monitoring 4 networks Worldwide access to any COMbricks Monitoring 4 networks ComBricks HE+ User Manual | June 2017 | © PROCENTEC 12/104...

  • Page 13: Email

    These applications simplify maintenance and eliminate the hassle to fly an expert over to fix a possible problem. On the LAN local technicians can also monitor the networks. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 13/104...

  • Page 14: Mining Applications

    PROFIBUS installations. Multiple WLAN routers can bring Ethernet up to the surface. With DTM technology the devices can also be diagnosed and parameterized. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 14/104...

  • Page 15: Robot Cells

    This is also convenient if the installation is behind a high-security zone such as baggage handling systems at airports, or parcel handling systems. Fig. 6 - Baggage handling or parcel systems ComBricks HE+ User Manual | June 2017 | © PROCENTEC 15/104...

  • Page 16: Traffic Control

    Many harbour cranes use PROFIBUS. There cranes are huge and sometimes hard to reach. The whole crane can be monitored remotely, which is especially useful if the crane is equipped with a WIFI connection. Fig. 8 - Crane applications ComBricks HE+ User Manual | June 2017 | © PROCENTEC 16/104...

  • Page 17: Other Applications

    An available master address is required. CommDTM FDT Applications ProfiTrace OE CommDTM Device DTM PROFIBUS DP Device DTM PROFIBUS PA Fig. 9 - CommDTM structure ComBricks HE+ User Manual | June 2017 | © PROCENTEC 17/104...

  • Page 18: Quick Start

    STEP 7 Set the IP address to the required value. (2.4 + 2.5) STEP 8 Check the modules and administrative info in the web server. (2.6) STEP 9 Test ProfiTrace OE on the PROFIBUS installation. (5.1) ComBricks HE+ User Manual | June 2017 | © PROCENTEC 18/104...

  • Page 19: Configure The Repeater Modules

    STEP 6 Update the IP settings and confirm it by clicking on "Save" (see Fig. 12). STEP 7 The web page will now reload with the new IP address. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 19/104...

  • Page 20: Customizing The Ip Address Through The Discovery Tool

    It is recommended to have only one network interface connection active (only wireless or only wired). In some cases the Discovery tool does not list all the ComBricks HE+ units when multiple network interfaces are active. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 20/104...

  • Page 21: Checking The Modules And Administrative Info In The Web Server

    Telnet connections • ProfiTrace Streaming Messages from the user connections Inserted modules in the system Connected PCs and other communication devices Fig. 12 - Overview of the available modules ComBricks HE+ User Manual | June 2017 | © PROCENTEC 21/104...

  • Page 22: Testing Profitrace Oe On The Profibus Installation

    Please follow the procedure described in 6.5. The following selections are possible: • Read settings from SD card • Save settings on SD card • Clear password • Reset to factory defaults • Warm start ComBricks HE+ User Manual | June 2017 | © PROCENTEC 22/104...
  • Page 23 Fig. 14 - Menu switch ComBricks HE+ User Manual | June 2017 | © PROCENTEC 23/104...

  • Page 24: Installation Instructions

    Click the module on the DIN rail first. Then push and click the module towards each other (see ). When the modules are inserted the correct way, a sharp clicking sound should be heard during the push. Then fasten the screw on the front. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 24/104...

  • Page 25: Removing Modules From Din Rail

    To remove a module, unscrew the front screw. Then press down the DIN rail clip on the bottom, using two fingers or a screw driver. Tilt the unit forward, releasing it from the DIN rail. Then lift it up. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 25/104...

  • Page 26: Wiring Ethernet

    Web server (refer to Fig. 23) as Power supply 1 and 2. The layout is as follows (when the wires are pointing down): 1 = - (left) 2 = + (middle) 3 = SH (right) ComBricks HE+ User Manual | June 2017 | © PROCENTEC 26/104...

  • Page 27: Procedure

    The SD LED should be ON (if an SD card is inserted). • The RDY LED should be ON (also on other inserted Modules). Redundant power connection 1 Redundant power connection 2 Fig. 18 - Head Station power supply ComBricks HE+ User Manual | June 2017 | © PROCENTEC 27/104...

  • Page 28: Repeater Modules

    3.8.1 Customizing the PROFIBUS network (NW0/NW1) Set these dipswitches to the following positions to customize a network number for a specific PROFIBUS network. Network LEFT LEFT RIGHT LEFT LEFT RIGHT RIGHT RIGHT ComBricks HE+ User Manual | June 2017 | © PROCENTEC 28/104...

  • Page 29: Redundancy (Red)

    RIGHT Software  When software is enabled, all switch settings are overruled. The settings can be modified in the webserver of the Head Station, and will be saved there. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 29/104...

  • Page 30: Wiring Repeater Modules

    Fig. 21 - Repeater connection tolopogies Because of the PROFIBUS spur lines limitations it is not recommended to use the screw terminal simultaneously with the DB9 connector. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 30/104...

  • Page 31: Screw Terminals

    DB9 connector and NOT on the repeater module (see Fig. 21 - configuration C) If you choose to use the DB9 connector, it is recommended to use the PROCENTEC ProfiConnector (any type), because this connector has the correct shape to fit over the green connector. See our website for more information about this connector.

  • Page 32: Web Server

     The minimum version requirements for Web browsers are: - Firefox 2.0 (24 October 2006) - Internet Explorer 6.0 (27 Augustus 2001) - Google Chrome 1.0 (24 April 2009) ComBricks HE+ User Manual | June 2017 | © PROCENTEC 32/104...

  • Page 33: Status

    On the bottom of the screen the connected clients with this ComBricks are visible. Location information Messages from the user Inserted modules in the system Connected PCs and other communication devices Fig. 22 - Status screen ComBricks HE+ User Manual | June 2017 | © PROCENTEC 33/104...
  • Page 34 Power redundancy status SD card status Current consumed by the modules Fig. 23 - Example of a module status ComBricks HE+ User Manual | June 2017 | © PROCENTEC 34/104...

  • Page 35: Channel List

    Show colour legend Network filters Inserted network Inserted network modules and the modules and the available channels available channels Communicating devices with Live List colours Fig. 24 - Channel list ComBricks HE+ User Manual | June 2017 | © PROCENTEC 35/104...

  • Page 36: System Log

    SD card. The interval time for autosaving can be adjusted on the ‘General Config’ page. System events Download and clear functions Fig. 25 - System log ComBricks HE+ User Manual | June 2017 | © PROCENTEC 36/104...

  • Page 37: General Configuration

    The display refresh rate has to be tuned to the bandwidth of the Ethernet connection. By default it is set to a 1 second automatic refresh. If the bandwidth is limited, it is recommended to increase this time or to switch the automatic refresh OFF. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 37/104...

  • Page 38: Network Configuration

    Network Event log. You can also select for which network this should apply. The interface language can be changed in the Preferred Language drop-down box. More languages are available as a separate download called ‘Language Pack’ on the website of PROCENTEC. Network configuration The network names and the assignment of the repeater modules are customized here.

  • Page 39: Ip Configuration

    Please note that changing the DNS server address requires a soft-reboot of the Head Station before the new setting becomes active. Soft-resetting the Head Station does not affect repeater modules; this is a separate process. You can safely soft-reset the Head Station without disrupting the repeater-functionality. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 39/104...

  • Page 40: Output Control

    After power down/up, the ComBricks loads and restores these settings.  It is recommended to have a security policy concerning passwords with this feature, because the user is able to control REAL output points. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 40/104...

  • Page 41: Password Setup And Login

    When only the Administrator login has been activated, the user can always enter the web server without a valid login. When settings need to be altered, the administrator is required to login. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 41/104...

  • Page 42: Password Best Practice

    Be careful about where passwords are saved on computers. Some dialog boxes, such as those for remote access, present an option to save or remember passwords. Selecting this option poses a potential security threat. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 42/104...

  • Page 43: External Protocols

    License Update page via an internet connection or simply copying the content of a license file. You can also see the current details of the activated license. Update the license here Details and limitations of the license Fig. 31 - License update page ComBricks HE+ User Manual | June 2017 | © PROCENTEC 43/104...

  • Page 44: Document Download Page

    SD card. If you are interested in such activities, we recommend you to inspect the structure of the PROCENTEC index.html first. Please note that the FTP process has a low priority in the ComBricks, so transfer of larger files may be slow.

  • Page 45: Email Account Configuration

    You can setup multiple email groups. Each group can receive emails triggered by different events, which can be set up in ‘Event config’ in paragraph 5.4. E-mail server parameters Daily test email enabled Direct testing of server settings, per group Fig. 33 - Email configuration ComBricks HE+ User Manual | June 2017 | © PROCENTEC 45/104...

  • Page 46: Alive Email

    The alive email is an automated check to see that the connection is still active. ComBricks can auto-send an email with adjustable interval of anything between one hour and 365 days. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 46/104...

  • Page 47: Email Troubleshooting

    SD card, remove the SD card from the slot and place it in the new Head Station. Then continue with paragraph 4.12.2. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 47/104...

  • Page 48: Restore Settings From Sd-Card

    To restart the device, for example to let it read new dipswitch settings or DNS server settings, click the ‘Restart the device’ button. Then click ‘OK’ on the confirmation window. This ‘soft’-reset will not affect PROFIBUS communication on the repeater modules; the repeater functionality will continue during reset. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 48/104...

  • Page 49: Profitrace Oe

    Same live List as ProfiTrace 2 Fig. 35 - ProfiTrace Live List The button ‘Display Legend’ pops up a window explaining all colours in more detail. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 49/104...

  • Page 50: Updating The Gsd File Library

    It displays all the important information that a user, especially a maintenance technician, is really interested in (see Fig. 36): • Retry messages • Fall-outs (losts) • Diagnostic messages • Location of the connected devices, etc. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 50/104...

  • Page 51: Message Recording

    The user can change the settings during operation (see Fig. 37). The recorded files can be opened with an offline ProfiTrace 2 (no license required). ComBricks HE+ User Manual | June 2017 | © PROCENTEC 51/104...

  • Page 52: Event Configuration

    For generating emails and entries in the network log, the event configuration has to be set for each network. Fig. 38 shows an example with multiple event options. Paragraph 5.10 describes the events and when they occur. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 52/104...
  • Page 53 After the interval time the event is automatically retriggered to be generated in the next interval. If no trigger was captured in the new interval period, no event will be generated. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 53/104...

  • Page 54: Tag Name Configuration

    • Oscilloscope Images • Oscilloscope Error Images • Oscilloscope configuration • Bar Graphs • PA measurements • Network Configuration • Output Control configuration ComBricks HE+ User Manual | June 2017 | © PROCENTEC 54/104...

  • Page 55: Oscilloscope Images

    By clicking on the oscilloscope waveform of a device, the oscilloscope triggers on the respective device and displays its signals in a new page.  The SCOPE repeater is only able to do differential measurements. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 55/104...

  • Page 56: Oscilloscope Configuration

    General Settings). So if you have many nodes, it will take a long time to refresh all the images on the page. 5.7.1.2 Line color You can change the line color of the scope. Default is purple for clear contrast when printing the page. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 56/104...
  • Page 57 Bargraph OK limit to 3V for example. Or if you have problems with a certain slave which cannot get a higher amplitude than 2.5V, you can lower the limit to 2V. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 57/104...

  • Page 58: Oscilloscope Images

    This is very useful for troubleshooting, because it captures the moment of a failure. This makes it easy to prove EMC or other cable problems. Select ComBricks module Fig. 43 - Oscilloscope error images ComBricks HE+ User Manual | June 2017 | © PROCENTEC 58/104...

  • Page 59: Bar Graph

    ProfiTrace 2.6.0 or higher • Only 1 ComBricks connection After successfully installing ProfiTrace 2, you can find a 'ProfiTrace v2.x for ComBricks' in the start menu of Windows (see Fig. 45). ComBricks HE+ User Manual | June 2017 | © PROCENTEC 59/104...
  • Page 60 Topology, ProfiCaptain and other tabs/menus are missing to the right of the single ProfiTrace tab (see Fig. 45). 2. Connect to a COMbricks unit 1. Start this shortcut from the Start Menu Fig. 45 - Starting ProfiTrace 2 for ComBricks ComBricks HE+ User Manual | June 2017 | © PROCENTEC 60/104...

  • Page 61: Summary Of Statistics And Events

    ProfiTrace instances can be opened that simultaneously communicate with different ComBricks units. Summary of Statistics and Events This paragraph contains a description of the items listed in the statistics and/or events. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 61/104...
  • Page 62 Service) or when the slave is not ready for an answer yet (Reject Resource). Ext. diag The number of times a slave has correctly answered a Get Diagnostics message back to the master. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 62/104...
  • Page 63 One of the redundant cables has a problem Redundancy fail The DC values of a PA or FF are out of range PA/FF Events The fiber optical budget is too low. Low/High signal (fiber optic) ComBricks HE+ User Manual | June 2017 | © PROCENTEC 63/104...

  • Page 64: Head Station

    Head Station HE+ 1B (101-30011C) (101-30011B) Selectable networks (for repeater modules) Web server CommDTM / Class 2 master SNMP ProfiTrace OE networks (for monitoring) Oscilloscope features ProfiTrace 2 live streaming ComBricks HE+ User Manual | June 2017 | © PROCENTEC 64/104...

  • Page 65: Relay Contact

    If the maximum number of read and write operations has exceeded the limits, data loss may be possible. 6.3.3 Directories and files The following directories have been standardized for ComBricks and are in most cases located on the SD card; ComBricks HE+ User Manual | June 2017 | © PROCENTEC 65/104...
  • Page 66 The files can be opened with ProfiTrace V2.5.3 and higher (See paragraph 5.3 on how to generate PTC files). .PKG Firmware files .CSV Log files (located in the "Log" directory) ComBricks HE+ User Manual | June 2017 | © PROCENTEC 66/104...

  • Page 67: Switch Navigation Of The Head Station

    5 seconds (L4) SF Blinking Tap Down/Up IOF Blinking Hold Wait Warm start up for Done USB Blinking 5 seconds (L5) Tap Down/Up LED walk through all the LEDs ComBricks HE+ User Manual | June 2017 | © PROCENTEC 67/104...

  • Page 68: Leds On The Head Station

    Backplane voltage too low (under 5,5 VDC) or current Fast draw to high (above 2,5 A) Clock-chip error Slow (contact your local Distributor or PROCENTEC) Internal component or firmware error (contact your local Distributor or PROCENTEC) ComBricks HE+ User Manual | June 2017 | © PROCENTEC 68/104...

  • Page 69: Scope Repeater Modules (Rs485)

    ProfiTrace OE is able to monitor 4 PROFIBUS networks with 2 units of 2 channel repeater modules. The DB9 connector is connected 1-on-1 to the connectors of the respective channels. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 69/104...

  • Page 70: Channel Structure

    The termination is switchable and powered by the repeater module. A green LED on the front of the module or in the web server diagnostics indicate the status of the termination switch. Fig. 48 - Channel structure of one repeater ComBricks HE+ User Manual | June 2017 | © PROCENTEC 70/104...

  • Page 71: Emc Barrier

    When the baudrate has been detected, the module has to "see" a valid telegram within 50 seconds, otherwise the module unlocks the baudrate and the 'ER' LED will be ON. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 71/104...

  • Page 72: Profibus Dp Cable Lengths

    ≥ 0.64 mm Impedance 150 Ohm (3 to 20 MHz) Wire area ≥ 0.32 mm Capacity ≤ 30 pF/m Shielding resistance ≤ 9.5 Ohm/km Loop resistance ≤ 110 Ohm/km ComBricks HE+ User Manual | June 2017 | © PROCENTEC 72/104...

  • Page 73: Profibus Dp Cable Types

    • Rodent protection cable Flexible cable Robust cable Food cable Hybrid cable Shipboard cable Trailing cable Festoon cable FRNC cable Fig. 51 – Range of supported PROFIBUS cable types ComBricks HE+ User Manual | June 2017 | © PROCENTEC 73/104...

  • Page 74: Redundancy

    If you mix ComBricks with other repeaters you only have to follow the cascading rules of the other repeater manufacturer. If the other repeaters are also from PROCENTEC, you can cascade and mix without problems. Keep in mind that monitoring will fully work, but the SCOPE repeaters only measure the signals up to the first repeater module.

  • Page 75: Leds Of The Repeater Module

    Internal termination for this Internal termination for this channel is OFF. channel has been activated. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 75/104...
  • Page 76 (< 2.5 V) Valid idle voltage Idle voltage is too (~ 1 V). low (< 1 V) Internal repeater Repeater is error (contact operational. PROCENTEC) ComBricks HE+ User Manual | June 2017 | © PROCENTEC 76/104...

  • Page 77: Commdtm

    It is a ZIP file containing several executables, which should all be installed. Setting up the PCD server Start the PCD (PROCENTEC Communication Driver) server (located in /Program Files/PROCENTEC/PCD/). You should see the PCD logo in the system tray. ComBricks HE+ User Manual | June 2017 | © PROCENTEC...

  • Page 78: Using The Commdtm

    Start your FDT manager and create or load a project. Vendor-independent platform PACTware is used in the example below. Refer to the manual of your FDT manager for details. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 78/104...
  • Page 79 In the upper menu, choose ‘Device – Add device’ and click on ‘PROCENTEC DP-V1 Master’, as shown in Fig. 55. Select PROCENTEC and Select PROCENTEC and choose the DP-V1 Master choose the DP-V1 Master Fig. 55 - CommDTM selection dialog After clicking ‘OK’...
  • Page 80 In PACTware, make sure to set the correct bus parameters by right-clicking the PROCENTEC DP-V1 master and choose ‘Parameters’. Enter the correct parameters or select ‘Start’ to auto-detect these (see Fig. 56). Then click ‘OK’. Next, choose the icon ‘Connect’ from the top menu.

  • Page 81: Opc

    (listening). Installing the OPC drivers The PC that runs ProfiTrace has to be prepared for OPC by installing the drivers (see Fig. 57). ComBricks HE+ User Manual | June 2017 | © PROCENTEC 81/104...

  • Page 82: Selecting Opc Tags

    The OPC tag settings can be found in the Settings menu (see Fig. 58). Select Setup OPC Tag Settings Fig. 58 - OPC tags in the Settings menu ComBricks HE+ User Manual | June 2017 | © PROCENTEC 82/104...
  • Page 83 (also during operation) Adding a variable tag pointing to slave data Tags which are already available (Live List, Statistics, etc.) Confirm the settings Fig. 59 - Adding OPC tags ComBricks HE+ User Manual | June 2017 | © PROCENTEC 83/104...

  • Page 84: Activating The Opc Server

    In the next dialog the server can be added (see Fig. 61).  A maximum of 16 servers can be created, each with its own tag groups. Select Setup OPC Server Fig. 60 - OPC server in the Settings menu ComBricks HE+ User Manual | June 2017 | © PROCENTEC 84/104...
  • Page 85 Ready! Fig. 62 - OPC server properties From this point any application that has the availability of an OPC client can access the ProfiTrace OPC tags. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 85/104...

  • Page 86: Snmp

    System temperature • System current • System voltage • System status • System I/O status • Micro SD card status • License code • Number of modules • Module info ComBricks HE+ User Manual | June 2017 | © PROCENTEC 86/104...

  • Page 87: Viewing The Mib File

    2. Download the MIB file and place it in C:\Program files (x86)\Snmpb\mibs\ 3. Start SNMPb and click the tab ‘Modules’. Search for the module ‘PROCENTEC-COMBRICKS-HS-T1-MIB’, select it and click the button -> so that the module moves to the right table. It is now loaded.
  • Page 88 Fig. 63 - Example of reading SNMP data The info panel of SNMPb shows the description and details of the selected SNMP item. For other freeware SNMP tools, see paragraph 12.5. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 88/104...

  • Page 89: Firmware Updates

    After the upload the Head Station will update the firmware. This can take a few minutes. The window that appears be can closed directly. STEP 7: Verify the firmware update by checking the firmware version in the web server (bottom of each web page). ComBricks HE+ User Manual | June 2017 | © PROCENTEC 89/104...

  • Page 90: Updating Modules

    Use the Discovery Tool if you do not know the IP address Double-click a module to select a firmware file Fig. 65 - Updating module Fig. 64 - Update complete ComBricks HE+ User Manual | June 2017 | © PROCENTEC 90/104...

  • Page 91: Tips And Tricks

    Some SNMP tools To test the ComBricks SNMP functionality, you can use the tools below: • SNMPb • NetSentinel by Micromedia • MIBbrowser by iReasoning • Solarwinds ComBricks HE+ User Manual | June 2017 | © PROCENTEC 91/104...

  • Page 92: Sales Offices And Distributors

    W: www.procentec.net China CZECH REPUBLIC FOXON s.r.o. T: +420 484 845 555 Polní 367 F: +420 484 845 556 460 01 Liberec 12 E: foxon@foxon.cz Czech Republic W: www.foxon.cz ComBricks HE+ User Manual | June 2017 | © PROCENTEC 92/104...
  • Page 93 Netanya, 42170 W: www.inst-ic.co.il Israel ITALY PROCENTEC Italy T: +39 030 200 8610 Via Branze n. 43/45 F: +39 030 238 0059 25123 Brescia E: www.procentec.it Italy W: www.procentec.it ComBricks HE+ User Manual | June 2017 | © PROCENTEC 93/104...
  • Page 94 T: +966 2 691 27 41 Al-Zahra Dist. – Attas st. F: +966 2 682 89 43 cross section with helmy Kutby St. E: info@asmestablishment.com Villa no.25 W: www.asmestablishment.com Jeddah-21553 Saudi Arabia ComBricks HE+ User Manual | June 2017 | © PROCENTEC 94/104...
  • Page 95 United Kingdom Hi-Port Controls T: +44 (0)8452 902 030 The Hub 2 Martin Close F: +44 (0)2392 552 880 Lee-on-Solent E: sales@hiport.co.uk Hampshire PO13 8LG W: www.hiport.co.uk United Kingdom ComBricks HE+ User Manual | June 2017 | © PROCENTEC 95/104...
  • Page 96 For the complete list of our Sales Offices and Distributors see www.procentec.com/company/distributors. If your country or region is not listed, please contact us. We are still searching for distributors who can cover complete areas or countries. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 96/104...

  • Page 97: Order Codes

    Head Station type 1B Standard Monitoring Kit 101-300QBS • One Dual Scope repeater (2 segments) • Head Station type 1C Advanced Monitoring Kit 101-300Q4CS • Two Dual Scope repeaters (4 segments) ComBricks HE+ User Manual | June 2017 | © PROCENTEC 97/104...

  • Page 98: Glossary

    - The first three octets of the user parameterization data are now standardized - Optionally these devices may support: - Acyclic communication (MS1, MS2) - If alarms are used, MS1 shall be supported ComBricks HE+ User Manual | June 2017 | © PROCENTEC 98/104...
  • Page 99 Active physical layer device that receives and retransmits all signals over a different port to increase the distance and number of devices for which signals can be correctly transferred for a given medium. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 99/104...
  • Page 100 The German PROFIBUS Organization based in Karlsruhe. Drop cable See Spur line. Reflection Part of the original signal that is transmitted back along the cable. It corrupts the original signal. ComBricks HE+ User Manual | June 2017 | © PROCENTEC 100/104...

  • Page 101: Certificates

    16. Certificates ComBricks HE+ User Manual | June 2017 | © PROCENTEC 101/104...
  • Page 102 17. About PROCENTEC PROCENTEC is a specialist in PROFIBUS and PROFINET technology and develops products to optimize the production processes of end users. Our innovative solutions ensure that our customers successfully operate in the world of industrial automation and enjoy maximum results from their process.
  • Page 103 18. Notes ComBricks HE+ User Manual | June 2017 | © PROCENTEC 103/104...
  • Page 104 PROCENTEC BV Klopperman 16 2292 JD Wateringen The Netherlands T: +31 (0)174 671 800 F: +31 (0)174 671 801 E: support@procentec.com W: www.procentec.com...

Table of Contents