Advertisement
Installation
NOTE: Please ensure to follow your aquarium tank and sump/filter manufacturer instructions
regarding the minimum size requirement of your sump and if a check valve is required.
Installing Pump
Submersible (internal) Installation
Step 1. Thread pump filter screen to inlet of the pump.
Step 2. Place 0-ring inside the outlet barb fitting and quick
coupling. Thread barb fitting to pump and hand tighten.
Step 3. Connect return hose (not included) by sliding over barb
fitting. Ensure hose is secured using a hose clamp (not
included).
Step 4. Fill sump with water and check for water/air leaks.
Inline (external) Installation
Step 1. Place o-ring inside the inlet barb fitting and quick
coupling. Thread barb fitting to pump inlet and hand tighten.
Step 2. Place o-ring inside the outlet barb fitting and quick coupling.
Thread barb fitting to pump outlet and hand tighten.
Step 3. Connect inlet hose (not included) by sliding over inlet barb
fitting. Ensure hose is secured by using a hose clamp (not
included.) Connect return hose to outlet barb fitting and
secure with clamp.
Step 4. Fill sump with water and check for water/air leaks.
Installing Flow Pump Manifold HUB
Step 1. Choose a location underneath your aquarium cabinet free of excessive moisture and/or
saltwater. If connecting to another manifold HUB, ensure distance between HUBs is 2"-4".
Step 2. Using included wood mounting screws, mount the eFlux flow pump HUB mounting bracket
to stand. Slide flow pump manifold HUB into bracket.
Wood
Screws
Flow Pump Manifold
HUB Mounting Bracket
Flow Pump
Manifold HUB
Page 3
eFlux DC Flow Pump
3
2
1
2
3
1
Store Cap
Note: Remove and store the
silicone caps on the manifold
Remove
Cap
HUB mounting bracket. Keep
caps in place when not using
other ports for protection.
Store Cap
3
Advertisement
