Selector Lever Positions P, R And N; Drive Range D - Daewoo Cielo Owner's Manual

Selector lever positions P, R and N

P = Park, with the front wheels locked. To
be selected only with the vehicle
stationary and the parking brake on.
R= Reverse. To be engaged only with the
vehicle stationary.
N= Neutral.

Drive range D

D= The drive position for normal driving
conditions in first to fourth gear.
Fourth gear (the overdrive gear) reduces
engine speed, fuel consumption and the
engine noise level.
After the engine has been started and "D"
selected, the economy driving programme
is always operative.
Drive range 3
3= The drive position for driving conditions
in first, second and third gear.
The transmission remains in third gear even
at high speeds. Do not select "3" above the
maximum permissible speed for this range.
Drive range 2
2= The drive position for first and second
gear, e.g. on winding mountain roads: the
transmission does not shift into third and
forth gear.
Drive range 1
1= The drive position for maximum braking
effect, e.g. when driving down severe
gradients; the transmission does not shift
beyond first gear.
2ñ7
CAUTION
To help prevent transmission damage:
ï Do not depress the accelerator
pedal while shifting from "P" or "N"
to "R", "D", "3", "2", or "1". Always
depress the brake pedal until
shifting is completed.
ï Do not drive in "2" for more than
8 km or at speeds over 90 km/h ,
or you can damage your transaxle.
Use "D" as much as possible.
ï Never shift to "P" or "R" while the
vehicle is in motion.
ï When stopping the vehicle on an
uphill gradient, do not hold the
vehicle by depressing
accelerator pedal. The foot brakes
should be used for this purpose.
WARNING
ï Do not use the P (Park) position in
place of the parking brake.
ï Turn off the ignition when you leave
the vehicle, even momentarily. Never
leave the vehicle unattended while
the engine is running. Unexpected
and possibly sudden vehicle
movement may occur if these
precautions are not taken.
the