Vivo DESK-V000V Instruction Manual page 2

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
A (x1) B (x2)
Desktop Extended Feet
E (x6) F (x1)
Screw Cable Clip
TOOLS NEEDED
Phillips
Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Carefully remove the desktop (A) from the packaging and flip the desktop (A) onto a flat surface. Attach
the extended feet (B) to the frame using screws (D).
2
C (x1) D(x10)
Keyboard Screw
Tray
G(x2) H(x2)
Ziptie Bracket
33lbs
14.97kg
B
D
B
STEP 2
Press the handles on each side and lift the
desktop (A).
STEP 4
Place laptop, monitor, and other items on desk
surface. Attach cable clip (F) to desk to manage
keyboard and mouse cables. Manage cables
using cable zipties (G).
F
G
CAUTION!
Keep monitor and Follow the cable
laptop base fully on routing instructions to
the desktop. avoid the potential to
pinch cables.
Failure to follow these instructions may result in property damage and/or personal injury.
STEP 3
Mount brackets (H) to keyboard tray (C) using
screws (D). Mount keyboard tray (C) to desk
using screws (E).
D
C
H
STEP 5
If locks are not releasing properly to change
desk height, adjust the position of the black
tube containing the steel release cable. Turn
the nuts at the end of the tube just behind
the handle as shown, moving the tube away
from the handle until the cable once again has
proper tension, then tighten the nuts.
Leave enough slack Raise desktop
in cable to allow for slowly to keep
full range of vertical items stable.
motion (15" / 38 cm).
E
3