Remote Control Kit - Honda EM5500CX Owner's Manual

[CXS type]

Remote Control Kit

1. Unscrew the four 6
panel.
2. Remove the plug from the 6-pin connector.
3. Connect the remote control cable to the 6-pin connector.
4. Pass the remote control cable through the cord grommet, and fit the
grommet into the cutout.
5. Reinstall the side panel using the four 6
6-PIN CONNECTOR
PLUG
50 mm
CUTOUT
SIDE PANEL
REMOTE CONTROL BOX
62
×
10 mm flange bolts, and remove the side
CORD GROMMET
×
10 mm flange bolts.
REMOTE CONTROL CABLE
×
6 10 mm FLANGE BOLT (4)