Advanced Operation - Kanematsu Corporaion BS HH16 User Manual

Time-Out Timer
If the selected channel has been programmed for Time-Out timer, you must limit the
length of each transmission, Wile transmitting, a beep will sound 10 seconds before
time-out.
Another beep will sound just before the deadline; The TX indicator will disappear the
transmission will cease soon thereafter. To resume transmitting, you must release the PTT
switch and wait for the "penalty timer " to expire (if you press the PTT switch before this
timer expires, the timer restarts, and you will have to wait another "penalty" period)

ADVANCED OPERATION

MONITOR
Press the monitor button hears background noise (unmute the audio); the BUSY/TX
indicator will grow green.
SCAN
The Scanning feature is used to monitor multiple channels programmed into the
transceiver. While scanning, transceiver will check each channel for the presence of a
signal, and will stop on a channel if a signal is present.
Press the SCAN button to active scanning.
The scanner will search the each channels, looking for active ones; it will pause each
time if finds a channel on which someone is speaking.
Press the SCAN button again to disable scanning. Operation will revert to the before
scan start channel.