Advertisement
Control and Connectors
FRONT PANEL
1
VOL/PWR Knob (3)
Turn this control clockwise to turn the radio on and increase the volume. Turn it
counterclockwise into the click-stop to the radio off.
2
BUSY/TX Indicator
Indicate transceiver Transmit/Receive Status
Steady Red: Transmitting(High) in progress
Steady Orange: Transmitting(Low) in progress
Steady Green: Busy Channel
3
Channel Selectable Knob (2)
Selectable channel Knob.
4
UDC Terminal (7)
Connect the microphone or speaker.
An external loudspeaker may be connected to this 2-contact.
Caution: Do not connect either wire of this line to ground, and be certain that the speaker
has adequate capability to handle the audio output (0.5W) from the radio.
Advertisement
