Gigabyte CafeBook M1028 User Manual page 20

Table of Contents

Advertisement

It's always the same to set user passport as that of supervisor password. But the former can only
enter OS, not BIOS Setup.
Password on Boot
This setting is to select whether password of supervisor and/or user is needed when booting.
Fixed disk boot sector
This setting is to select whether to have Write Protect on hard disk boot section to anti virus or not.
Notice: Do not lose the password of your system. In the event of this, you should have to
refer to GIGABYTE service center.
3.4 Set Boot priority order
With this setting, you can set the order of booting the hardware of M1028 CafeBook.
To select the boot device, you can use the up or down arrow key, then press <+> to move up the
device in the list or press <-> to move down the device in the list. To exit from this menu, press
<Esc>.
3.5 How to Exit the Setup Program
Exit Saving Changes:
Save the settings by user and exit the BIOS setting menu.

Advertisement

Table of Contents
loading

Table of Contents