ABB -free@home SAP/S.3 Product Manual page 31

Option D: Establishing the connection with the PC via patch cable and without router
(Available from System Access Point Firmware Version 2.0)
1. Connect the System Access Point and the PC with a patch cable (no special crossover
cable is required)
2. Energize the System Access Point. Ensure that the access point mode has not been
activated. If it is activated, press the Access Point button to deactivate it.
Notice
The System Access Point now operates as "DHCP Client", this means that it can
only be reached under the IP address that is assigned to it automatically by the
PC.
3. Call up the user interface of the System Access Point.
Open the Windows Explorer of your PC. The System Access Point is displayed as device
under "Network". Double click on the device to open the user interface (prerequisite: the
computer must support UPnP).
4. The connection to the System Access Point has been established.
Product manual 2CKA001473B9726
Commissioning
│31