ABB -free@home SAP/S.3 Product Manual page 30

Option C: Establishing the connection with the PC via patch cable and router
1. Connect the System Access Point and the PC with the router.
2. Energize the System Access Point. Ensure that the access point mode has not been
activated. If it is activated, press the Access Point button to deactivate it.
Notice
The System Access Point now operates as "DHCP Client", this means that it can
only be reached under the IP address that is assigned to it automatically by the
router.
3. Call up the user interface of the System Access Point. For this there are two options:
[A] Open the Windows Explorer of your PC. The System Access Point is displayed as
device under "Network". Double click on the device to open the user interface
(prerequisite: the computer must support UPnP).
[B] Enter the IP address that is automatically assigned by the router in the address line of
your browser. You find the assigned IP in the user interface of your router.
4. The connection to the System Access Point has been established.
1
2
Fig. 16: Connection via patch cable and router
Notice
Description of LED signals, see chapter "Control elements" on page 51.
Product manual 2CKA001473B9726
3
Commissioning
│30