DeWalt DS350 Manual page 3

arrows to scroll through the faults. Resolve the issue with the action
listed in Description of Fault Codes chart.
DESCRIPTION OF FAULT CODES
Fault Code Fault Display
DevPower Primary Power
Lost Device #
DevLowBatt Low Battery
Device #
WeakSig Weak Signal
Device #
Unsecured Unsecured
Device #
NoCheckIn No Check In
Device #
Tamper Tamper
TO REMOVE A TAMPER FAULT
1. Select CLEAR.
2. Use the keypad to enter the master code.
3. Select OK.
Full One Year Warranty
The D WALT JobSite Security Portable Alarm System is warranted for
E
one year from date of purchase. We will repair, without charge, any
defects due to faulty materials or workmanship. For warranty repair
information, visit www.dewalt.com or call 1-800-4-D
(1-800-433-9258). This warranty does not apply to accessories or
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
Description Action
No battery power Change battery,
in device
Device battery Change battery,
low
Transmission signal Check for interference;
from device is weak move device
Device has Check for intrusion;
been tripped re-secure device
Device check-in Check for interference;
messages have move device
not been received
Device has been Close device or
opened or damaged replace if damaged
reset
reset
WALT
E