Labels On Charger And Battery Pack; Package Contents; Description (Fig. 1) - DeWalt DCF887 Original Instructions Manual

Labels on Charger and Battery Pack

In addition to the pictographs used in this manual,
the labels on the charger and the battery pack may
show the following pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Battery charging.
Battery charged.
Battery defective.
Hot/cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care
for the environment.
Charge D WALT battery packs only with
e
designated D
battery packs other than the designated
D WALT batteries with a D
e
charger may make them burst or lead
to other dangerous situations (see
Technical Data).
Do not incinerate the battery pack.

Package Contents

The package contains:
1 Impact driver
1 Charger
WALT chargers. Charging
e
WALT
e
1 Li-Ion battery pack (M1, L1, C1, P1, X1, T1,
D1, D1B models)
2 Li-Ion battery packs (M2, L2, C2, P2, X2, T2,
D2, D2B models)
3 Li-Ion battery packs (M3, L3, C3, P3, X3, T3,
D3, D3B models)
1 Magnetic bit holder
1 Belt hook
1 Kitbox
1 Instruction manual
1 Tool Connect App instruction manual
TM
(B models)
NOTE: Battery packs, chargers and kitboxes
are not included with N models. Battery packs
and chargers are not included with NT models.
B models include Bluetooth
NOTE: The Bluetooth
®
registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by D
under license. Other trademarks and trade names
are those of their respective owners.
• Check for damage to the tool, parts or
accessories which may have occurred
during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.

Description (Fig. 1)

WARNING: Never modify the power
tool or any part of it. Damage or personal
injury could result.
A. Trigger switch
B. Forward/reverse control button
C. Chuck collar
D. 1/4" (6.35 mm) hex chuck
E. Battery release button
F. Battery pack
G. Worklights
H. Belt hook (optional accessory)
I. Mounting screw
J. Main handle
K. Mode selector
L. Magnetic bit holder
INTENDED USE
This impact driver is designed for professional
impact screwdriving applications. The impact
function makes this tool particularly useful for driving
fasteners in wood, metal and concrete.
DO NOT use under wet conditions or in the
presence of flammable liquids or gases.
English
battery packs.
®
word mark and logos are
WALT is
e
,
®
9