Smeg FP130B Instructions For Installation And Use Manual page 22

13.6.3 Setting the cleaning cycle with electronic programmer
FUNCTION SELECTOR KNOB
CLEANING CYCLE MINIMUM DURATION: 1 h and 30'
Turn the function selector knob to the
minimum duration of
the key and the increase/decrease keys
a maximum of 3 hours.
The cleaning cycle can be programmed to start at a preset time. Press the
using the value variation keys
13.6.4 Setting the cleaning cycle with programmer+clock
FUNCTION SELECTOR KNOB
CLEANING CYCLE MINIMUM DURATION: 1 h and 30'
Position the function selector knob on
clockwise to set the pyrolysis time in window B.
It can be set from a minimum of 1 hour, 30 minutes, to a maximum of 3 hours.
Instructions for the User
ON
ON
OFF
OFF
symbol, press the
: the thermostat light will come on. To display or adjust this duration, press
or . The duration of the pyrolysis cycle can be set up to
or .
: the thermostat warning light will light up. Turn knob A
-
300 °C
500 °C
300 °C
key and then press once to set the
key and adjust the values
51