Dimensions For Installation - Smeg Oven FM38X Operating Manual

Dimensions for installation

The oven has an high-performance air circulation system which gives remarkable results for
cooking and cleaning, as long as the following points are applied:
The oven may be fitted either underneath a work surface or in a suitable sized column
unit. Cut a hole measuring 50 mm x 50 mm in the back wall of the insert space for the elec-
tric cable to pass through (See diagram, left).
Centre the oven in the unit, and make sure that it is at least 2 mm from any other unit
beside it.
The unit must be heat-resistant (or covered with heat-resistant material).
The oven must be disconnected from the power supply while it is being installed in the
unit.
For greater stability, fix the oven in the unit with 2 screws in the holes on the side
walls (see diagram). Make a 3 mm diameter hole in the side of the unit first to prevent the
wood from splitting.
548
22
595
310
96
555
560-568
20 50
550 mini 400
560-568