Advertisement
Quick Links
METAL COLUMN LOUDSPEAKER
MCS20/TC
Installation instructions
98
Top cover
TOP
Volume control location on base
Front View
unit: mm
1. Remove the top cover of the unit (cable gland end) and connect the 100 volt line input cable
into the ceramic terminal block through the cable gland provided.
2. On removing the top cover of the loudspeaker you will observe a three way terminal block that
is connected to the 100 volt line transformer, as this unit is provided with a selector switch located
at the base of the column) insert the 100 volt line cable using the red wire to the red and
black to black cable connections.
Top view of column loudspeaker with lid off
Three way ceramic terminal block
Cont/d
Advertisement
Summary of Contents for Penton UK Ltd MCS20/TC
-
Page 1: Installation Instructions
METAL COLUMN LOUDSPEAKER MCS20/TC Installation instructions Top cover Volume control location on base Front View unit: mm 1. Remove the top cover of the unit (cable gland end) and connect the 100 volt line input cable into the ceramic terminal block through the cable gland provided. - Page 2 9. On checking the line impedance is to your requirements, the unit is ready for use. A swivel mounting bracket is available for this unit see Penton accessories. Penton UK Ltd, Unit 2, Teville Industrials, Dominion Way, Worthing, West Sussex BN14 8NW Tel: 01903 215315 Fax: 01903 215415 E-Mail: sales@pentonuk.co.uk Web: www.penton.org...