G-project G-BOOM2 Manual page 14

FAQs
Q: Why can I not pair my Bluetooth device?
A: Occasionally the Bluetooth may need to be reset on your G-BOOM2, and/or your Bluetooth
streaming device(s).
First you will want to go into the Bluetooth settings menu on your audio streaming device
and delete / 'forget this device' from the list completely.
Next you will want to clear the Bluetooth memory on your G-BOOM2 which can be done by
pressing and holding the Pairing button for 3 seconds or until the blue LED starts blinking,
indicating that G-BOOM2 is searching for a compatible Bluetooth device.
Now with your Bluetooth streaming device and G-BOOM2 both powered on, try searching
for compatible devices under the Bluetooth settings menu of your audio streaming device.
After a few seconds it should detect G-BOOM2, at which time you can select 'G-BOOM2'
and establish a new connection.
Q: Why do I not hear any music when I play the radio?
A: Make sure that a 3.5mm Line-In cable is not plugged into the Line-In jack of G-BOOM2
as this will automatically switch the unit to AUX even if there is no external audio device
connected.
Q: FM radio station not playing clear?
A: For best reception please place the unit close to window or open area to improve reception
quality. Keep digital music players or mobile phones away from G-BOOM2 as this may
cause interference. Do not place G-BOOM2 near the AC power adaptor as this may lead
to reception interference.