Bluetooth Operation - G-project G-BOOM2 Manual

BLUETOOTH OPERATION

You can stream audio wirelessly to G-BOOM2 from up to 33' away using your
iPhone, iPad, iPod, Android, laptop, or other A2DP Bluetooth enabled device.
1 Press the POWER ON/OFF button to turn on G-BOOM2.
2 Then press the Bluetooth PAIR button. The LED Status indicator will flash
blue and Bluetooth icon will light up on the LCD display.
3 Turn on your compatible A2DP Bluetooth device and enable Bluetooth.
4 Search for Bluetooth devices and select "G-BOOM2".
5 The blue LED Status indicator will change from flashing to solid,
indicating that your Bluetooth device is connected to G-BOOM2.
NOTES:
• Press and hold the Bluetooth PAIR button for 3 seconds to disconnect the current
Bluetooth connection.
• The unit will return to pairing mode and the blue LED Status indicator will flash.
• If asked for a password, enter "0000".