Advertisement
Chapter 2. Installing the WLAN Card
This chapter will assist you in completing the hardware and software installation of the
GN-WIKG Wireless Mini-PCI Adapter successfully. Please refer to the driver & utility
installation section that matches your operating system.
2-1. Installing the Wireless Mini-PCI Adapter
Step 1: Turn off your PC and disconnect the power cord.
Step 2: Remove the PC cover.
Step 3: Locate an available Mini-PCI slot and remove its back plate from the PC chassis.
Step 4: Insert the GN-WIKG Mini-PCI Adapter into the slot and fasten it to the chassis
using the screws in step 3.
Step 5: Power on your desktop PC.
3
Advertisement
Need help?
Do you have a question about the GN-WIKG and is the answer not in the manual?