Specifications - Harbor Freight Tools CEN-TECH 41080 Operator's Instruction Manual

when measuring 1000MΩ resistance the display reading will be 1010
and the correct measuring result should be 1010
AUDIBLE CONTINUITY TEST
1. Connect red test lead to "Ω" jack, black test lead to "COM" jack.
2. Set range switch to "
3. Connect test leads to two points of circuit to be tested. If continuity exists,
built-in buzzer will sound.

SPECIFICATIONS

Accuracy is specified for a period of one year after calibration and at 18
(64°F to 82°F) with relative humidity to 80%.
GENERAL
Maximum voltage between
terminals and earth ground
Display
Polarity indication
Overrange Indication
Jaw opening capability
Power
Low battery indication
Operating Environment
Storage temperature
Temperature coefficient
Altitude
Size
Weight
DC VOLTAGE
Range Resolution
1000V 1V
Input Impedance: 10MΩ
£
" position.
: CAT II 1000V dc or 750V ac rms. (sine)
:LCD, 1999 counts, updates 2-3/ sec.
:"-"displayed for negative polarity
:Only figure "OL" on the display
: 55mm (Max conductor size)
:9V battery, NEDA 1604 or IEC 6F22
:" " appears on the display
¤
:0 to 40
¤ ¤
:-10 to 50
:0.1 ¥ s pecified accuracy) /
¤ ¤
( <18 or >28 )
: 2000m
: 282mm ¥ 1 04mm ¥ 4 7mm
: Approx.500g.
Accuracy
±1.0% of rdg ± 2 digits
-7-
10 = 1000 MΩ.
¤ ¤
to 28
¤