Vertex Standard VX-450 SERIES Operating Manual page 20

(VHF) FCC ID:K6610943020, IC:511B-10943020 / (UHF) FCC ID:K6610944720, IC:511B-10944720
TX S D
AVE ISABLE
Press the assigned Programmable key to disable the
Transmit Battery Saver, if you are operating in a lo-
cation where high power is almost always needed.
The Transmit Battery Saver helps extend battery life
by reducing transmit power when a very strong sig-
nal from an apparently nearby station is being re-
ceived. Under some circumstances, though, your
hand-held radio may not be heard well at the other
end of the communication path, and high power may
be necessary at all times.
E
NCRYPTION
Press the assigned Programmable key to toggle the
Encryption feature "On" and "Off."
18
A O
DVANCED PERATION
FM S
The FM Scan feature checks a User-assigned Prior-
ity Channel regularly as you scan other channels.
Thus, if only Channels 1, 3, and 5 (of the 8 available
channels) are designated for "Scanning," the user may
nonetheless assign Channel 2 as the "User-assigned"
Priority Channel via the
To activate FM Scan, first select the channel you want
to designate as the "User-Assigned Priority Chan-
nel" and press the assigned programmable key. Then
rotate the CH Selector knob to recall to the "Scan-
ning Start" channel which has been programmed by
your dealer to activate the scanner. When the scan-
ner stops on an "Active" channel, the User-assigned
Priority Channel will automatically be checked ev-
ery few seconds; if activity is found on the User-as-
signed Priority Channel, the radio will switch between
it and the Dealer-Assigned Priority Channel, if any.
CAN
"Follow-Me"
VX-450 S O
ERIES PERATING
Vertex Standard Co.,Ltd.
feature.
M
ANUAL