VTech CS6758-3 User Manual page 11

Handset battery charging
Once you have installed the battery, the screen indicates the battery status. For
best performance, keep the handset in the handset charger when not in use. The
battery is fully charged after 11 hours of continuous charging.
Battery indicators Battery status
The screen is blank, or The battery has no charge or
shows Put in charger and very little charge. The handset
flashes. cannot be used.
The screen shows The battery has enough
Low battery charge to be used for a
and
short time.
flashes.
The screen shows The battery is charged.
HANDSET X.
Tabletop to wall mount installation
The telephone comes ready for tabletop use. Follow the steps below to mount
your telephone on a wall.
1. Unplug the power adapter and
telephone line from the wall outlets.
and the telephone base.
TEL. LINE
Use Only
Supplied Adapter
3. Swivel the wall mount bracket down.
5. Press the wall mount bracket onto the telephone base until it clicks into place.
Plug the power adapter and telephone line into the wall outlets. Align the holes
on the wall mount bracket with the standard wall mounting plate and slide the
telephone down until it locks securely. Bundle the telephone line cord and
power adapter cord neatly with twist ties.
Action
Charge without interruption
(at least 30 minutes).
Charge without interruption
(at least 30 minutes).
To keep the battery charged,
place it in the handset
charger when not in use.
2. Push to open the wall mount bracket
as the arrows indicated below.
4. Plug the power adapter and the
telephone line cord to the base
through the space between the wall
mount bracket and the base.
3