Description Of The Controls - Smeg Dishwasher ST93P Instruction Manual

1. Description of the controls

1.1 Upper panel
All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
2
end
ON/OFF BUTTON
1
Pressing this button energises the appliance.
SELECTED PROGRAM INDICATOR LIGHTS
2 Illumination of this light denotes the program selected and the occurrence of a
fault (troubleshooting).
PROGRAM SELECTION BUTTON
3
By pressing this button in sequence it is possible to select the desired program.
RINSE AID WARNING LIGHT
4
Illumination of this light signals that rinse aid dispenser is empty.
EXTRA PROGRAM BUTTON
5
This button gives access to the one of the five extra programs (see table).
EXTRA PROGRAM LIGHT
Illuminates to indicate that one of the five extra programs (see table) is going
6
to be executed.
HALF LOAD BUTTON
7
Press this button to activate the half load wash option.
HALF LOAD LIGHT
8
Illumination of the light indicates selection of the HALF-LOAD function.
PROGRAM DELAY BUTTON
9
Press this button to delay the start of the program by up to 9 hours.
INFORMATION DISPLAY
10
User instructions
3 4 8 7 6 5 10 9 1
11