If this is the case, we recommend these seals be dangerous to the operator or anyone stand- replaced every 4 years. ing nearby. Giant Plunger Pumps are suitable for pumping clean water and other non-aggressive or non- abrasive media with a specific weight similar to water.
Page 3
CP460 Pump Specifications U.S. Metric Volume ............ 1.6 GPM ............6.2 L/min Discharge Pressure ........ 6000 PSI .............. 580 Bar Inlet Pressure .......... 14-1200 PSI ............1-83 Bar Stroke ............. 0.98” ...............24 mm Speed ........................Up to 750 RPM Plunger Diameter ........0.55” ..............14 mm Temperature of Pumped Fluids ....
Page 4
Exploded View - CP460 Note: Do not use mineral oil on seals and o-rings. Use silicone grease only. CP460 REPAIR KITS Plunger Packing Kits Valve Assembly Kits Part # CP09499-0023 Part # CP09498-0003 Item Part # Description Qty. Item Part # Description Qty.
Page 5
CP460 PARTS LIST ITEM PART DESCRIPTION QTY. ITEM PART DESCRIPTION QTY. 08377 Crankcase 05938 Seal Adapter 08378 Oil Fill Plug with Gasket 04761 Seal Case 06479 Crankcase Cover 04767 Set Screw 07186 Oil Sight Glass w/Gasket 1 07266-0003 O-Ring 08380...
Page 6
Repair Instructions - CP460 Pumps Note: All o-rings and seals must not come into contact with mineral oil. Use silicone grease only. Inlet Valves Remove inner hexagon screws (34) and pull off valve casing (26) to the front. Take out seal case (25) from valve casing (26).
Page 8
A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required prior to the return to Giant Industries of all products under war- ranty consideration. Call (419)-531-4600 or fax (419)-531-6836 to obtain an R.G.A. number.