Meade LPI-G Series Quick Start Manual page 7

Autoguiding with the LPI-G Series Camera
The Meade SkyCapture software does not contain autoguiding software. To use the the LPI-G or LPI-G
Advanced camera as an autoguiders, you must install the LPI-G ASCOM driver. The LPI-G series cameras
work in a number of freeware autoguiding programs, such as PHD2 Guiding (available from openphdguid-
ing.org).
Connect the included autoguide cable (ST-4 compatble) from the LPI-G to the to the autoguide port on
your mount. Note: Some mounts use similar 6-pin ports which are not intended for the autoguider.
Please confirm that your mount is ST-4 compatble before using the LPI-G as an autoguider.
Autoguiding with PHD2 Guiding using ASCOM
Run PHD Guiding software first and click the camera button on the left bottom of the application
Select the "ASCOM Camera Chooser" in the Camera selection drop list box and then click the "Connect"
button.
7