Included Items - Meade LPI-G Series Quick Start Manual

Included Items

Requirements
Compatible with Windows XP / Vista / 7 / 8 / 10 (32 & 64 Bit), Mac OS X, and Linux
Computer should have at least 2GB of memory, Intel Core2 2.8GHz CPU equivalent or higher, and be
equipped with a USB 2.0 port. For the LPI-G Advanced camera, USB 3.0 is recommended for maximum
frame rate.
Quick Start Summary
1. Install Meade's SkyCapture software, camera DirectShow drivers, and ASCOM Platform & camera driv-
ers onto the computer using the included Meade SkyCapture CD-ROM.
2. If you will be using a special camera filter, attach the included nosepiece to the front of the camera.
Then thread on the special camera filter to the front of the nosepiece.
3. Connect the Meade LPI-G to the computer using the included USB cable.
4. If using the camera as an autoguider, connect one end of the included ST-4 autoguide cable into the
camera and the other end into the telescope guider port. See your telescope mount instructions on how to
do this.
2