Advertisement
Top Button Paging System
Manual
3. PAGING
The table number will be displayed with the alert, when it is paged.
Press the side button to stop alert.
Unchecked message keeps blinking.
When it stores multiple messages, you can scroll the messages by pressing the
side button.
To delete the message, press the side button for more than 1.5 seconds when
it displays the table number.
4. OPERATION (For 3 Top Button Transmitter only)
1) To page Waiter
- When you press WAITER button shortly, it transmits and displays "TABLE –
Number" to the waiter pager.
- After transmitting is finished, red LED blinks once.
2) To page Manager
- When you press MANAGER Button shortly, it transmits and displays "TABLE –
Number" to the manager pager.
- After transmitting is finished, red LED blinks once.
3) To cancel page
- When you press CANCEL button, it transmits and erases the corresponding page.
Table". Once again, press the side button shortly, it will show
"Power Off". It will be turned off when you are pressing the side
button for 3 seconds
Wireless Setting Mode - Press the Side Button for 3 seconds on
the Receiver Pager. "SET TABLE" will show on the display. Press
the side button for 3 seconds, and it will be into the Table
Setting Mode ("Saved None" will show on the display if no
transmitters are assigned yet. If not, the number of transmitter
which are already assigned will show on the display)
User
Advertisement
