Advertisement
Top Button Paging System
Manual
2) Top Button Transmitter number setting (with Receiver Pager)
: Paring the Top Button Transmitters to each Receiver pagers.
* INSTRUCTION
(1) By using the side button on the Receiver Pager, you can enter to the wireless
setting (paring) mode.
(2) While the pager is in the setting mode, press any buttons on the Top Button
Transmitter.
(3) The number of Top Button Transmitter will show on the display which states
the Top Button Transmitter has been assigned to the Receiver Pager
successfully.
(4) Please refer to the explanation shown the picture as below:
ON – Press the side button for 3 seconds.
OFF – Press the side button for 3 seconds, it will display "Set
Side
User
Advertisement
