Advertisement
Quick Links
Select.live
Quick Installation Guide
Installation of Select.live with SP PRO series I and series II
Introduction
Thank you for purchasing Select.live. This product will allow you to monitor your SP PRO system wherever
you have an Internet connection.
This instruction will show how to install the Select.live (Order code 005283) for SP PRO series II and SP
PRO Series I. The SP PRO series I also needs Select.live Adaptor Kit (Order code 005290).
This product is suitable for single phase or Advanced Multiphase (three phase and split phase) systems.
For more detailed information see
C
P
ONTENTS OF
ACKING
Select.live (Order code: 005283)
A
Position
A
B
C
D
E
F
Select.live Adaptor kit for SP PRO Series I (Order code: 005290)
A
Position
A
B
C
D
IN0054 Revision 10 (005305)– 1 of 7
OI0009_xx Select.live User Manual
B
C
Quantity
1
Select.live
1
Wall Mount Plate
1
Communication Cable
4
Wall Mount Screws and wall anchors
2
Double Side Mounting Strip
2
Small screw
B
Quantity
1
12V DC power adaptor
1
Powered Console cable
1
25mm Gland
1
70mm long Wire Sleeve
found at
www.selectronic.com.au
D
Description
C
D
Description
POWER
PERFORMANCE
E
F
PASSION
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Selectronic Select.live
Summary of Contents for Selectronic Select.live
- Page 1 Internet connection. This instruction will show how to install the Select.live (Order code 005283) for SP PRO series II and SP PRO Series I. The SP PRO series I also needs Select.live Adaptor Kit (Order code 005290).
- Page 2 2. Connect your Select.live to the SP PRO series II inverter using the supplied communication cable as shown above to power the device and communicate with SP PRO. For SP PRO Series I inverter, you must purchase the Select.live Adaptor kit for SP PRO Series I (Order code: 005290).
- Page 3 2. From your computer or mobile, connect to the Select.live using Wi-Fi SSID: “selectronic” with no password. 3. To setup the Select.live, open a web browser and enter http://192.168.1.1. The web link will then direct you to the Select.live setup web interface.
- Page 4 Select.live Quick Installation Guide 5. Once the Select.live Setup Wizard is complete, wait approx. 30 seconds and then the following display will appear on the Select.live display screen. Your Select.live is now ready to register for the Select.live Portal using Device ID and Serial. Note: If Ethernet is selected, connect a network cable from the Select.live to the modem or router after the Setup Wizard is completed.
- Page 5 Quick Installation Guide 4. Leave “Access required” as User. 5. Congratulations, you have successfully completed the setup for Select.live. Now you will be able to see your SP PRO system in the Select.live Portal’s Systems page. Granting Access to your installer If you wish to allow your installer to also have access to your system then you must grant your installer access.
-
Page 6: Specification
Select.live Quick Installation Guide Specification Physical Dimensions 150mm x 150mm Weight 315g LCD display 128px x 64px Housing material UV stabilized PC+ABS IP rating IP43 Operating temperature -10 to 70°C Operating humidity 5 to 95% humidity Technical Wireless 802.11b/g/n Wi-Fi 2.4GHz Wireless range 100m max, line of sight. -
Page 7: Troubleshooting
Solution Make sure your SP PRO is turned ON Check the power connection to the Select.live and check if any text is displayed on the screen to indicate the device is ON. Factory reset your Select.live to reset the Wi-Fi connection and use the Setup Wizard to connect to the Internet.
Need help?
Do you have a question about the Select.live and is the answer not in the manual?
Questions and answers