DEMA Flex Flow Quick Start Manual page 11

Programming
pH Mode
1. Press Menu
2. Use arrows to change Control to pH press Enter
3. Calibrate use arrows to select Yes or No. If you already know your pH select No*
4. Low pH – use arrows and Enter button to enter the low pH setting
5. Low Strokes – use arrows and Enter button to enter number of strokes
6. High pH – use arrows and Enter button to enter the High pH setting
7. High Strokes – use arrows and Enter button to enter number of strokes
8. High Alarm – use arrows and Enter button to enter high pH setting to alarm
9. Low Alarm – use arrows and Enter button to enter Low pH setting to alarm
10. Limit – use arrows and Enter button to set time for alarm limit.
11. Reset Lmt – use arrows and Enter button to set the time before the Alarm Limit Resets.
* - See manual for complete Calibration Instructions.