Table of Contents
Related Manuals for 3M 895
Summary of Contents for 3M 895
- Page 1 Pad Staff Workstation Model 895 PRERELEASE DOCUMENTATION Site Planning Guide 3M Security Systems Division 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 78-8126-xxxx-x Rev 1 Copyright © 2004 3M IPC. All rights reserved.
-
Page 2: Table Of Contents
Reader pad cable........................9 Power cables.......................... 9 Section 2 – Basic Operation................10 Pad Staff Workstation Software..................10 Section 3 - Care and maintenance..............11 Cleaning the reader pad..................... 11 Requesting service.....................11 Before you call ........................11 3M Service Phone Numbers....................11... -
Page 3: Intended Use
Workstation Model 895 in conjunction with a bar code scanner supplied by the customer. Designed for use with a PC computer supplied by the customer, the Model 895 includes software packages that enable the user to perform the above functions using 3M™ D8 RFID tags. - Page 4 To reduce the risks associated with environmental contamination from circuit boards containing lead-bearing solder within the Model 895, which, if not avoided, may result in minor or moderate injury: § At the end of service life, dispose of the Model 895 according to federal, state and local requirements.
-
Page 5: Label Locations
Label Locations Model 895 12 VDC 300 mA N1108 S/N: 895XXXX RFID Reader Model 895 12 VDC 300 mA FCC ID: DGF-SSD895 3.6 W Canada: __________ S/N: 895XXXX N1108 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:... -
Page 6: Emc, Usa, And Canada Compliance
NO MODIFICATIONS. Modifications to this device shall not be made without the written consent of The 3M Company. Unauthorized modifications may void the authority granted under Federal Communications Commission Rules permitting the operation of this device. -
Page 7: Section 1 - Overview
Section 1 - Overview The 3M™ Pad Staff Workstation Model 895 is used with other equipment and software to read and/or program 3M™ RFID Tags. Reader pad components The reader pad includes the following components: § 3M RFID Reader Pad §... -
Page 8: Reader Pad
Equipment specifications Reader pad Dimensions Length: 11.4 in. (28.9 cm) Width: 11.4 in. (28.9 cm) Height: 0.4 in. (1.0 cm) Weight 32 oz. (.91 Kg) Environmental Typical ambient temperature range: 50°F to 104°F (10°C to 40°C) Humidity: 0% to 85% RH, non-condensing Reader Dimensions Length: 5.6 in. -
Page 9: Cable Lengths
The reader pad has a 6.67-foot (2-meter) Customer-supplied Computer cable. § If necessary, 25-foot (7.62-meter) extension cables are available from 3M Serial Cable to computer (with the total length not to exceed 50 6.5 ft. (2 meter) ft. (15.25 meters). -
Page 10: Section 2 - Basic Operation
The 3M™ Pad Staff Workstation software consolidates a number of library functions to enable staff to process items identified by 3M™ D8 RFID tags. The workstation reads item ID information from the tags and sends the information to the library circulation system. The Pad Staff Workstation software secures and un-secures tags as required. -
Page 11: Section 3 - Care And Maintenance
§ DO NOT use any abrasive cleaners on the reader pad. § DO NOT use any liquid cleaning solutions on the 3M™ RFID Reader. Requesting service Before you call Before you call 3M Service, have the following information available: §...