Advertisement
The system power cord must be plugged into a properly grounded outlet to prevent
electric shock. Ensure that it is plugged into a grounded outlet.
Do not install the product in locations with high humidity. It may result in a risk of
electric shock. Use the product within the operational humidity range specified in the manual.
Keep plastic packaging away from children.
If they wear the plastic package on their heads, they can suffocate.
Do not block any of the product's ports or vents. Do not put any object inside the
product.
If ports or vents are blocked with any material, internal parts of the product can be damaged and result in a
risk of fire or electric shock.
When installing the product, check the following before selecting the location.
Air is clean.
Proper ventilation is provided.
Not in direct sunlight, or near heat sources.
There is no vibration or physical shock.
Well away from electric devices causing strong electromagnetic radiation.
Outlet is properly grounded.
Enough space to reach power cords.
In areas where severe thunderstorm might occur, connect the system to a circuit breaker and separate the
communication lines from the modem.
Connect power source directly to the outlet.
Otherwise it may result in a risk of fire.
If there is any noise from the power source plug or the outlet, unplug the power source
and contact your dealer.
If the power source is left plugged in, it may result in a risk of electric shock and fire.
Instructions when using DR Gateway
When cleaning the product, make sure that you unplug all the power source cables
before cleaning.
It may result in a risk of electric shock.
Do not place cup or any container filled with chemical or water on or near the product.
If chemical or other substances leak inside of the product, it can cause parts to be damaged and result in a risk
of electric shock and fire.
Do not expose the product to direct sunlight.
In particular, if the product is exposed to direct sunlight in an airtight space such as in a car, the inside
temperature of the product increases and it can cause its shape to be deformed or it may result in a risk of fire.
If the product is dropped or broken due to any other reasons, disconnect the power
and have it checked by your dealer.
Advertisement
