Technical Data; Infrared Night Vision; Power Supply - Kerbl 10812 Instructions For Use Manual

OSD function
The OSD function (on screen display) can show the system
name, date and time, and user-defined info on the screen.
Authentication
You must enter your user ID and password in the authenti-
cation window. The password prevents unregistered users
access to your camera. Users can select between the basic
authentication method or the direct access authentication
method.

Infrared night vision

The camera uses infrared LEDs. When the environment is
dark, the LEDs activate automatically via a light sensor.
The video switches from colour to black & white. The ran-
ge is approx. 5 m.
Adapter
When using the power adapter, make sure that the nomi-
nal voltage matches that of the device to avoid damage
due to incorrect use of the power supply.
Warranty card
Based on our General Terms and Conditions of Business, we offer a 1 YEAR WARRANTY
for this device covering damage caused by material or manufacturing defects. This
warranty begins on the date of purchase.
The warranty does not cover:
1. damaged caused by natural wear and tear (wear parts, sliding parts), excessive
strain and incorrect use (non-compliance with operating instructions).
2. Damage caused by force majeure or sustained during transport.
3. Damage to rubber parts, e.g. on connecting lines. Warranty repairs are only carried
out by the manufacturing plant or an authorised contracted workshop. The manufac-
turer reserves the right to reject any warranty claims in the event of non-compliance.
The device must for this purpose be returned to the point of sale, at the risk of the
device owner, complete, packaged and with sufficient postage, including the original
invoice and the warranty card. (address see dealer stamp). Please provide as much
information as possible on the nature of the problem. Costs incurred as a result of
unjustified defect claims will be invoiced to the device's owner.

3. Technical data

Function types: AP
Transmission standard: Wi-Fi (IEEE 802.11b/g/n)
Transmission frequency: 2.4 GHz
Modulations: OFDM/DBPSK/DQPSK/CCK
Transmission range: 50 m (without obstacles)
Transmission strength: 17 dBm (max.)
Antenna: 2 dBI / External connecting
Video
Image sensor: 1/4" CMOS
Screen resolution: HD (1280x720 pixels) /
VGA (640x480 pixels)
Image compression: H.264 / MJPEG
Frame rate: 25 FpS (VGA), 15 FpS (720p)
Viewing angle: 100 °
Minimum luminosity: 2.0 Lux/F2.0, 0 Lux (IR ON)

Power supply

Input voltage: DC +5 V
Battery: Lithium polymer battery, 3.7 V, 3000 mAh
Power consumption: 330 mA or 550 mA (IR ON)
Current consumption: 550 mA
Charging time: up to 5 hours
Operating time: 8 hours (IR OFF) / 5 hours (IR ON)
Night vision
Number of LEDs: 14
Luminous efficacy: 5 m / 60 °
Miscellaneous
Protection type: IP 66
Magnetic force: 8 kg (vertical)
Weight: 360 g
Dimensions: 85.5 x 59.5 x 50 mm
Accessories: mains adapter, antenna, user manual
Storage temperature: -40 °C ~ 85 °C /
Operating temperature: -10 °C ~ 50 °C /
Ambient humidity during operation: 0 ~ 90 %
CE Declaration of Conformity
Albert Kerbl GmbH hereby declares that the SmartCam 10812 complies
with the 2014/53/EU Directive. The full text of the EU Declaration of
Conformity can be found on the following website: www.kerbl.com/doc
Electrical waste
It is up to the operator to dispose of the SmartCam responsibly in ac-
cordance with local regulations. Consult the relevant regulations for your
country. The device must not be disposed of in household waste. Under the
terms of the EU Directive on the disposal of old electrical and electronic
equipment, the device can be taken to local authority-run refuse sites or recycling
plants free of charge, or returned to dealers who offer a returns service. Correct dis-
posal protects the environment and prevents any possible harmful impacts on humans
and the environment.
12
-40 °F ~ 185 °F
14 °F ~ 122 °F