Table of Contents
Advertisement
SECTION 1
General Information
itself according to those parameters which were in ef-
fect immediately prior to the last power shut-off.
GPIB interface included as standard equipment.
Output mode switchable from automatic (AUTO) to
fixed (FXD).
A wide range of front and rear panel I/O interconnec-
tions to control or modify signal operations and pa-
rameters.
, .3
WARRANTY INFORMATION
Warranty information is located on the inside front cover
of this instruction manual. Should your Model 3933A re-
quire warranty service, contact the Keithley representa-
tive or authorized repair facility in your area for further
information. When returning the instrument for repair,
be sure to fill out, and include, the service form at the back
of this manual in order to provide the repair facility with
the necessary information.
1.4
MANUAL ADDENDA
Any improvements or changes concerning the instru-
ment or manual, will be explained in an addendum in-
cluded with the unit. Be sure to note these changes and
incorporate them into the manual before using or servic-
ing the unit.
1.5
SAFETY TERMS AND SYMBOLS
The following safety terms and symbols are found on the
instrument, or used in this manual.
The A 1 symbol on the instrument indicates that the
user should refer to the operating instructions.
The WARNING heading used in this manual explains
dangers that might result in personal injury or death. Al-
ways read the associated information carefully before
performing the indicated procedure.
The CAUTION heading used in this manual explains
hazards that could damage the instrument card. Such
damage may invalidate the warranty.
1.6
UNPACKING AND REPACKING
1.6.1
Unpacking
After carefully unpacking the instrument from its ship-
ping carton, inspect it for obvious signs of physical dam-
age. Report any such damage to the shipping agent im-
mediately. Save the original packing carton for storage or
possible reshipment.
1.6.2
Shipment Contents
The following items are included with every Model
3933A order:
l
Model 3933A Phase Shifter
l
Model 3933A Instruction Manual
l
Power Cord
l
Fuse 0.5A, WOV, 5.2 x 20mm (FU-96-2)
l
Digital I/O interconnection cable (CA-941
l
BNC to BNC signal cable (Keithley Model 7051-2, -5, or
-10)
l
Additional accessories as ordered
1.6.3
Instruction
Manual
If an additional instruction manual is required, order the
manual package, Keithley part number 3933A-901-00.
The manual package includes an instruction manual and
any pertinent addenda.
1.6.4
Repacking For Shipment
Should it become necessary to return the Model 3933A
for repair, carefully pack the unit in its original packing
carton or the equivalent. Be sure to use a cardboard box of
sufficient strength.
Include the following information:
l
Advise as to the warranty status of the instrument.
l
Write ATTENTION REPAIR DEPARTMENT on the
shipping label.
o Fill out and include the service form located at the back
of the manual.
1.7
OPTIONAL ACCESSORIES
The following accessories are available for use with the
Model 3933A.
l-2
Advertisement
Table of Contents
