SMC Networks SMC6724L3 INT Installation Manual page 52

M N
AKING ETWORK
3. Connect one end of the cable to the SC port on the switch and the
other end to the SC port on the other device. Since SC connectors are
keyed, the cable can be attached in only one orientation.
Figure 4-3. Making SC Port Connections
4. As a connection is made, check the Activity LED on the switch's front
panel for the corresponding module to be sure that the connection is
valid.
Note: If you use the optional SC-ST Converter, be sure to connect the
converter's Tx (Rx) port to the Rx (Tx) port on the other device.
4-6
C
ONNECTIONS
SC fiber connector