SMC Networks SMC6724L3 INT Installation Manual page 42

I
NSTALLING THE
To rack-mount devices:
1. Attach the brackets to the device using the screws provided in the
Bracket Mounting Kit.
2. Mount the device in the rack, using four rack-mounting screws (not
provided).
3. If installing a single switch only, turn to "Connecting to a Power
Source" at the end of this chapter.
4. If installing multiple switches, mount them in the rack, one below the
other, in any order.
3-4
S
WITCH
Figure 3-1. Attaching the Brackets
Figure 3-2. Installing the Switch in a Rack